We’ve all been there, trying to capture that perfect shot or video in challenging conditions, only to find our lighting inadequate. Whether it’s exploring underwater or filming in low-light environments, the lack of proper illumination can completely ruin a potential masterpiece. This problem isn’t just frustrating; it means missed opportunities to preserve incredible memories or create stunning content. Finding a reliable, powerful lighting solution is crucial to ensure those moments aren’t lost in the shadows. For anyone who uses an action camera like a GoPro, DJI Osmo, or Akaso, getting a diving light like the Suptig model could have significantly enhanced my early attempts at low-light and underwater filming.
- Suptig diving lights Compatible for Gopro Hero13/Hero 12/Hero 11/ Hero 10/Hero 9/Hero 8/ Hero 7/ Hero 6/ Hero 5/ Hero 4/ Hero 3+/ Hero session/Hero+/fusion/Max will be great accessories for all those...
- THREE MODES OF LIGHT: Normal(HI) Power saving(LOW),Flash(SOS). Size: 2.95 in(L) x 1.65 in(W) x 2.75 in(H)
- RECHARGEABLE BATTERY: 1050mAh. Running time: High light (1.5 hours); Low light (4 hours); SOS (6 hours). The battery can be removed for replacement(Compatible with Gopro hero 3/3 + batteries)
Essential Considerations for Choosing a Waterproof Camera Light
When considering a waterproof camera light, you’re likely trying to overcome the limitations of natural light, especially when you’re submerged or filming after dusk. These lights are essential for bringing colour back into underwater footage, as water absorbs light wavelengths the deeper you go, leaving everything looking monotone and blue or green. On land, they provide crucial fill light or primary illumination for low-light action shots. The ideal customer for a light in this category is someone who regularly uses an action camera for activities like diving, snorkeling, kayaking, night biking, or any scenario where supplemental, waterproof lighting is needed. If you only ever film in bright daylight on dry land, a waterproof light isn’t necessary, and you might be better off with standard photography lighting or reflectors.
Before purchasing a waterproof LED light, several factors demand careful consideration:
* Waterproof Depth Rating: Does it meet the depth requirements for your intended activities (snorkeling, shallow diving, deep diving)?
* Brightness and Light Modes: Is it bright enough? Does it offer different power levels to conserve battery or adjust intensity? Are the modes useful for your specific needs (e.g., video vs. emergency signalling)?
* Battery Life and Type: How long does it run on a charge? Is the battery easily rechargeable? Can it be replaced, and is the battery type readily available?
* Compatibility and Mounting: Will it attach easily and securely to your action camera setup (mounts, handles, trays)? Is it compatible with your specific camera brand and model?
* Durability and Build Quality: Given it will be used in potentially harsh environments (water, impact), how robust does it feel? Are the seals secure?
* Size and Weight: Is it manageable and not overly bulky or heavy when attached to your setup?
* Price: Does the cost align with the features and anticipated usage frequency?
Thinking through these points will help narrow down your options and find a light that truly meets your needs.
- Powerful functions, diverse colors, 21 button mode remote control, 7 kinds of lamp color change, adjustment of light brightness, automatic mode, three speed timing, etc., to meet your needs for...
- Super Bright Flashlight: Updated XM-L2 Led, the maximum range up to 100 meters. The diving light can be submerged up to 80 ft. So diving flashlight provides you ultra-bright light when underwater...
Introducing the Suptig Diving Light High Power Dimmable Waterproof LED Video Light Diving Underwater Light Waterproof 147ft(45m) Compatbile for Gopro Akaso DJI osmo and More Action Cam
The Suptig Diving Light High Power Dimmable Waterproof LED Video Light Diving Underwater Light Waterproof 147ft(45m) Compatbile for Gopro Akaso DJI osmo and More Action Cam is designed as a versatile lighting solution specifically for action camera users who venture into or around water. It promises to provide ample illumination to improve video and photo quality in low-light or underwater environments down to 45 meters (147ft). The package typically includes the light unit itself, a rechargeable battery, a USB charging cable, and a standard action camera mount with a tightening wrench.
This particular light is best suited for action camera enthusiasts who need reliable lighting for diving, snorkeling, or general low-light action filming. Its compatibility with a wide range of cameras from GoPro to DJI and Akaso makes it a flexible choice. It might not be the top-tier choice for professional deep-sea videographers requiring extremely high brightness or specific colour temperatures, but for recreational users looking to enhance their footage without breaking the bank, it’s a solid option.
Here’s a quick look at its potential pros and cons based on the information available:
Pros:
* High waterproof rating (45m / 147ft) suitable for most recreational diving.
* Offers multiple light modes (High, Low, SOS) for versatility.
* Uses a rechargeable and *removable* battery, compatible with GoPro Hero 3/3+ batteries.
* Wide compatibility with major action camera brands (GoPro, DJI, Akaso, etc.).
* Standard action camera mount for easy integration into existing setups.
Cons:
* Reported issues with build quality, specifically leaks or moisture getting inside.
* Can heat up considerably during use.
* Light pattern might create hotspots, potentially less ideal for consistent photography lighting.
* Battery life on the highest setting is relatively short (1.5 hours).
* One user reported the mount snap not locking securely.
Diving Into the Details: Performance and Advantages
Let’s break down the key features and benefits of the Suptig Diving Light High Power Dimmable Waterproof LED Video Light and how they translate into real-world usage, drawing from my long-term perspective and available feedback.
Deep Waterproofing (Rated to 45m / 147ft)
The headline feature of the Suptig underwater light is undoubtedly its waterproof rating of 45 meters (147ft). For recreational divers, this is a crucial specification. The majority of open water certifications allow dives up to 18-20 meters (60-66ft), and more advanced certifications typically go to 30-40 meters (100-130ft). A 45-meter rating covers the vast majority of depths encountered by non-technical divers. This means you can confidently take the light down on most dives, enhancing the colour and visibility of the underwater world that your action camera captures.
Why is this depth rating so important? As mentioned earlier, water rapidly absorbs light. Below just a few meters, reds and oranges disappear, followed by yellows and greens as you go deeper. By 20-30 meters, everything looks predominantly blue. A powerful LED light like the Suptig diving light adds back the full spectrum of light, allowing your camera sensor to record the vibrant colours of fish, coral reefs, and other marine life as they appear to the naked eye. Without it, your amazing dive footage would likely be a monochromatic disappointment.
However, it is essential to address the user feedback regarding leaks. While the factory test rating is 45m, several users have reported the light leaking even in shallow water (4 feet) or showing moisture build-up inside after use. This suggests that while the *design* is rated for 45m, the *manufacturing consistency* or the *quality of the seals* might be variable. Long-term reliability for frequent deep dives could be a concern based on these reports. Proper maintenance, ensuring seals are clean and free of debris before every use, and tightening the closure correctly are absolutely critical for any waterproof housing, and doubly so here given the reported issues. For truly critical applications or deeper dives nearing the limit, rigorous testing in shallower water first is highly recommended. Despite these concerns, many users *have* successfully used it at significant depths (one mentioning 20 meters) without issue, highlighting that when a good unit is received and properly maintained, it performs its primary function effectively.
Brightness and Versatile Light Modes
The Suptig LED Video Light offers three distinct light modes: Normal (High), Power Saving (Low), and Flash (SOS). The “High” mode provides the maximum brightness, which is crucial for cutting through murky water or illuminating darker areas like underwater caves or shipwrecks, as one user noted. This high power is where you’ll get the best colour rendition and illumination range.
The “Low” mode is beneficial for several reasons. It conserves battery life significantly, extending run time from 1.5 hours to 4 hours. This is ideal for longer snorkeling sessions or dives where maximum brightness isn’t constantly needed, or when you just need a bit of fill light. It also provides a less intense light, which can be better for avoiding overexposure on closer subjects or being less disruptive to marine life.
The “Flash (SOS)” mode is primarily for emergency signalling, emitting rapid flashes in the SOS pattern. While useful as a safety feature if you ever get separated or need to signal for help on the surface or at night, as one user pointed out, it’s not practical for continuous video recording. It would be beneficial if one of the modes offered a different strobe pattern (like continuous strobe) or a simple off mode without cycling through SOS, but for its intended purpose as a backup signal, it serves its function.
The benefit of having these modes is adaptability. You can choose the appropriate brightness level for the conditions, whether you need maximum power for a dark wreck penetration or lower power for a long reef drift. The LED technology ensures bright, consistent light output within each mode. One user mentioned the light output being brighter than other similar lights they had tried, which is a strong positive point for improving video quality. However, the user also noted that the light pattern at close range could create “hot spots” due to the reflectors, which is something to consider if using it for macro videography or still photography where even lighting is critical. For wider-angle action camera footage, this might be less noticeable.
Rechargeable and Swappable Battery System
The Suptig underwater light comes with a 1050mAh rechargeable battery. The fact that it’s rechargeable via USB is convenient for topping up the power between uses or on the go. However, the real stand-out feature here, highly praised by users, is that the battery is *removable* and is compatible with GoPro Hero 3/3+ batteries.
This compatibility with standard GoPro batteries is a significant advantage. Many action camera users, particularly GoPro owners, already have spare Hero 3/3+ batteries. This means you can easily swap out a depleted battery for a fresh one while out in the field or on a dive boat, effectively extending the light’s usage time far beyond the stated 1.5 hours (on high) or 4 hours (on low). You’re not limited by the single battery included; you can carry multiple spares and keep the light running for extended periods, which is invaluable on multi-dive trips or long filming sessions. This contrasts sharply with lights that have sealed, non-replaceable internal batteries, which are useless once the charge runs out until you can find a power source. The ability to swap batteries is a major plus for practicality and usability during longer adventures. While the battery life itself isn’t the longest on the highest setting, the ability to quickly swap it mitigates this potential disadvantage considerably.
Broad Compatibility and Standard Mounting
Compatibility is key when adding accessories to an action camera setup, and the Suptig Diving Light High Power Dimmable Waterproof LED Video Light excels here. It’s listed as compatible with a vast range of popular action cameras, including GoPro Hero 3+ through Hero 13, DJI Action series, Insta360, Akaso, SJCAM, and “More Action Cam”. This wide support means that whether you’re using one of the latest GoPros or an older model, or even a competitor brand, this light is likely to work with your camera system.
Furthermore, the light features a standard action camera mount on top, allowing you to attach your camera directly to the light, or attach the light to any standard action camera mount (like chest mounts, handles, tripod adapters, etc.). This universal mounting system is incredibly convenient. You don’t need proprietary adapters; it integrates seamlessly with the vast ecosystem of action camera mounts already available. One user specifically loved the GoPro mount on top, finding it very easy to attach to their dive gear with the camera on top.
However, one user did report an issue where the “snap that holds it into the GoPro mount doesn’t lock in,” almost causing them to lose the light and requiring a zip tie for security. This points to another potential quality control issue with the included mount or the light’s mounting point. While standard mounts are a pro, ensuring the connection is secure before taking it into potentially challenging environments is vital. The inclusion of a small plastic wrench to tighten the bolt is helpful for getting a snug connection, but it doesn’t alleviate the potential issue with the primary snap mechanism reported by one user.
Practical Design and Build (with notes on potential issues)
The physical dimensions of the Suptig LED Video Light are reasonably compact at approximately 7.5L x 7W x 4.2H centimetres (2.95L x 1.65W x 2.75H inches). This size makes it manageable to attach to various mounts without being overly cumbersome. Its design incorporates the battery compartment with seals necessary for the waterproof rating and the LED array with reflectors on the front.
While many users find the light functionally effective, several significant disadvantages related to build quality have been reported. Beyond the leaking issue at depth or even shallow water, and the mount snap problem, users have mentioned the light heating up significantly during use and creating moisture inside. One user specifically noted a visible “bow” in the case assembly where it closes, which would clearly compromise the waterproof seal and lead to flooding. These reports of heating, moisture, case deformities, and leaking are serious concerns that potential buyers must consider. They suggest that while the *design specifications* are good on paper (45m waterproof, high power LED), the *execution in manufacturing* may not always be consistent or robust enough for challenging underwater environments over time. For use as a splash-proof light or for very shallow, casual use, it might be fine, but relying on it for repeated deep dives based solely on the 45m rating carries a risk according to user feedback.
Despite these potential drawbacks, some users have had positive long-term experiences, using it for multiple dives without issues, and even for non-diving applications like night biking where its brightness and waterproof features (against rain/puddles) proved highly effective. This dichotomy in user experience highlights the importance of potentially getting a good unit and maintaining it meticulously, or conversely, being prepared for possible issues and returns based on reported quality variance.
What Other Adventurers Are Saying
Having looked at online feedback, it seems many users have found the Suptig Diving Light to be a valuable accessory, especially appreciating its brightness for illuminating dark underwater spots and its compatibility with various action cameras. The ability to swap out batteries, particularly using common GoPro Hero 3/3+ ones, was frequently highlighted as a major convenience. However, it’s clear that some users have encountered significant problems, including the light leaking at various depths (even shallow ones), moisture building up inside, the unit overheating, or issues with the mounting mechanism not being secure. While some experienced reliable performance, others felt it wasn’t truly suitable for diving and was more “splash proof” at best, expressing disappointment with the quality control.
Final Thoughts and Recommendation
The problem of poor lighting in underwater or low-light action footage is a common barrier to capturing truly stunning video and photos. Without adequate light, colours are lost, details are obscured, and the vibrancy of the scene diminishes significantly. This not only impacts the quality of your content but also means you’re not fully preserving the experience of the adventure itself.
The Suptig Diving Light High Power Dimmable Waterproof LED Video Light Diving Underwater Light Waterproof 147ft(45m) Compatbile for Gopro Akaso DJI osmo and More Action Cam offers several compelling features to address this. Its high waterproof rating means it *can* accompany you on most recreational dives (though potential quality control issues exist), its multiple light modes provide flexibility, and critically, its swappable battery system using readily available GoPro batteries offers excellent practicality for extended use. If you’re looking for an affordable way to add light to your action camera setup for aquatic or low-light adventures and are willing to ensure meticulous maintenance and perhaps test its waterproof capabilities gradually, this light is a strong contender. To learn more and see if it fits your needs, click here to check it out.
Last update on 2025-07-09 / Affiliate links / Images from Amazon Product Advertising API