Batmax Rapid LCD Display USB Dual Battery Charger for Arlo Pro, Arlo Pro 2 & Arlo Go Review

Living with wireless security cameras like the Arlo system can be a game-changer for home monitoring, but it also comes with the persistent challenge of keeping those batteries charged. I remember the constant frustration of having a camera go offline just when I needed it most because the battery died. This wasn’t just an inconvenience; it created vulnerable blind spots in my security coverage, leaving my property exposed until I could swap in a fresh battery. Finding a reliable and efficient charging solution became absolutely essential to maintain continuous peace of mind.

Batmax Rapid LCD Display USB Dual Battery Charger for Arlo Pro,Arlo Pro 2 & Arlo Go Rechargeable...
  • Fully Compatible with: Arlo Pro, Arlo Pro 2, Arlo Pro Light and Arlo Go rechargeable batteries;
  • Fast Charging at 9v Output: Get Rapid LCD Dual Charger to save your time and maximize the charging speed of your Arlo Pro;
  • Dual charging bays allow you to charge up 2 two batteries simultaneously;

What to Look For Before You Buy a Battery Charger for Arlo

Wireless security cameras, particularly models like the Arlo Pro series or Arlo Go, offer incredible flexibility in placement since they don’t require a power outlet nearby. This freedom is their greatest strength, but it also means relying entirely on rechargeable batteries. The primary problem these cameras solve is providing security monitoring where traditional wired cameras cannot easily reach. Anyone with multiple Arlo cameras running on rechargeable batteries will understand the need for an external charging solution. You’ll seek one if you find yourself frequently swapping batteries and waiting for the in-camera charging or a single-battery station to slowly replenish power, leading to frustrating downtime.

However, this type of charger isn’t necessary for everyone. If you only have one Arlo camera and it’s conveniently located near an outlet, or if you primarily use wired security cameras, an external multi-battery charger might be overkill. In such cases, simply charging the battery while it’s in the camera might suffice, or a basic single-bay charger could be adequate.

Before investing in a dedicated battery charging station for Arlo cameras, there are several key factors to consider. You’ll want to check for compatibility with your specific Arlo battery models (Pro, Pro 2, Go). Charging speed is paramount – a faster charger means less downtime for your cameras. The number of charging bays is also important; being able to charge two batteries simultaneously significantly increases efficiency. Look for clear charging indicators, safety features like overcharge protection, and the type of power input it uses (USB is common and versatile). Finally, consider the physical size and overall build quality, as it will likely live somewhere visible.

Bestseller No. 1
NB-6L Wall Charger for Canon PowerShot SX530 HS, SX610 HS, SX710 HS, SD1200 is, SD1300 is, S120 IXY...
  • How to choose: Please make sure battery model which printed on the label of your battery(Not camera) in this list: NB-6L, NB-6LH
Bestseller No. 2
Kastar Intelligent Mini Travel Charger (with High Speed Portable USB Charge Function) for PDA Camera...
  • Intelligent: Kastar Mini Rapid A/C Charger Features a Fold-out US Plug, 100-240V Worldwide Input Voltage, with high speed USB charge function.
Bestseller No. 3
NB-4L Battery and LED Display Charger for Canon PowerShot ELPH 100 HS 300 HS 330 HS 310 HS SD1000...
  • 【High Capacity】2 pack 1080mAh high capacity batteries. Use high quality cells for longer battery life with no memory effect.

Meet the Charger

The Batmax Rapid LCD Display USB Dual Battery Charger is designed specifically to address the battery woes of Arlo users. It’s a dedicated charging station for Arlo Pro, Arlo Pro 2, and Arlo Go rechargeable batteries, promising to speed up the charging process and allow you to power up two batteries at once. When you purchase the Batmax charger, you typically receive the dual charging station unit itself, a Micro USB cable for power, and a user manual. This specific product is really aimed at anyone who owns Arlo cameras that use the compatible rechargeable batteries and is tired of the slow, single-battery charging process, whether it’s via the camera itself or a basic charger. If you only have one battery or don’t mind the long wait times, this might be more than you need, but for multi-camera setups, it’s a significant upgrade.

Here’s a quick rundown of the pros and cons I’ve found:

Pros:
* Charges two batteries simultaneously, halving downtime.
* Supports faster charging with QC2.0/QC3.0 adapters (sold separately).
* Clear LCD displays show individual battery charge status.
* Wide compatibility with Arlo Pro, Pro 2, and Go batteries.
* Built-in safety protections against overcharging and short circuits.

Cons:
* The plastic build quality feels a bit light or “third-class quality of plastic” to some users, though mine has held up fine.
* Relies on a separate USB power adapter (not included unless specified, though most people have spares).
* Micro USB port feels slightly outdated compared to USB-C.
* Some very rare user reports of issues, though often unclear if caused by the charger or battery.

Deep Dive into What It Offers

Stepping back and looking at the overall experience of using the Batmax dual battery charger for my Arlo system, several features stand out as making a real difference in daily use. It’s not just about plugging batteries in; it’s about how efficiently and reliably it keeps my cameras running.

Wide Compatibility with Arlo Batteries

One of the most practical aspects of this charger is its broad compatibility. It explicitly supports batteries for the Arlo Pro, Arlo Pro 2, and Arlo Go cameras. If you, like me, have a mix of these camera models or have upgraded over time but still use older batteries, this is a huge advantage. I don’t need different chargers for different cameras; they all use the same Batmax charging station. This unified approach simplifies my setup and ensures that every Arlo battery I own can be quickly put back into service. The benefit here is pure convenience and cost savings – no need to buy multiple specialized chargers. It means less clutter and knowing that any spare battery I grab will fit and charge correctly. For anyone invested in the Arlo ecosystem with multiple camera generations, this compatibility is a fundamental requirement, and the Batmax meets it well.

Effortless Dual Charging Capability

The ability to charge two batteries simultaneously is arguably the most impactful feature for active Arlo users. Arlo cameras, while efficient, still require battery swaps, and having a spare battery ready is crucial. With a single-bay charger or charging via the camera, you’re often waiting for hours for one battery to be ready before starting the next. The dual battery charger changes the game. I can swap out two depleted batteries from cameras, place them both in the charger, and significantly reduce the total waiting time until I have fresh batteries ready to go back into service. This is invaluable, especially if you have several cameras or high-traffic areas that drain batteries faster. The benefit is continuous monitoring; my cameras spend less time offline waiting for a battery, which directly translates to enhanced security coverage and peace of mind. It turns the chore of battery management from a bottleneck into a streamlined process.

Accelerated Charging Speeds

Speed is of the essence when your security cameras are down. The Batmax Rapid LCD Display USB Dual Battery Charger lives up to its “Rapid” designation, particularly when paired with a Quick Charge (QC2.0 or QC3.0) compatible power adapter. While it works with any standard 5V 2A USB source, connecting it to a QC adapter enables a faster charging mode. This is a significant upgrade from standard 5V/1A or 5V/2A chargers often used for these batteries. Getting batteries back to full charge quicker means cameras are offline for shorter periods. In a security context, reducing downtime is critical. It feels noticeably faster than charging the batteries in the cameras themselves, allowing me to rotate through my battery collection more efficiently and ensure I always have a charged pair ready for deployment. The difference between waiting 4-6 hours per battery on a slower method versus potentially cutting that time down with rapid charging is substantial for maintaining active surveillance.

Informative LCD Status Indicators

No one wants to guess how much charge their batteries have or when they’ll be ready. The clear LCD displays on the Batmax charging station solve this perfectly. Each charging bay has its own dedicated display. When a battery is inserted, the screen illuminates and shows a battery icon with segments or a percentage indicating the current charge level. While charging, it typically cycles through segments or shows the percentage increasing. This immediate visual feedback is incredibly helpful. I can see at a glance whether a battery is nearly full or just starting, allowing me to prioritize which ones to use or swap. It takes the guesswork out of battery management and helps plan when cameras will need servicing. The benefit is simple but profound: clear communication about the charging process, making it easier to manage my entire system efficiently.

Integrated Safety Features

Charging batteries, especially high-capacity ones like those used in Arlo cameras, requires safety precautions. The Batmax charger incorporates automatic constant current control along with protection against overcharging, short circuits, and electronic shock. While the overall plastic feel might seem less premium than some higher-end chargers, these underlying safety mechanisms are crucial for protecting both the batteries and the charger itself. Overcharge protection helps prevent damage to the battery cells, potentially extending their lifespan, while short circuit protection guards against dangerous malfunctions. Although one user review mentioned a concerning incident (where it was unclear if the charger or battery was at fault), the presence of standard safety features provides a baseline level of reassurance. The benefit here is peace of mind, knowing that the charger is designed with safety in mind to prevent potential issues during the charging cycle.

Flexible USB Power Input

The charger uses a standard Micro USB input for power, requiring a 5V adapter (2A recommended for optimal speed, or QC enabled for rapid charging). While I initially wished it was USB-C, the Micro USB input offers versatility. It means I can power the charger using a variety of sources I already own: wall adapters from old phones, power banks, or even a laptop’s USB port (though charging might be slower depending on the source). This flexibility is convenient for travel or setting up the charger in different locations without needing a specific power brick. The provided Micro USB cable is standard, making it easy to replace if needed. This means I’m not tied to a proprietary power supply, which is a practical benefit in a multi-device household.

Compact and Unobtrusive Design

Physical size and weight might seem like minor points, but they matter when you’re dealing with camera accessories that often sit on shelves or countertops. The Batmax charger is relatively compact and very lightweight (listed at only 0.1 kg and very slim dimensions). It doesn’t take up much space, making it easy to place near my Arlo base station or in a dedicated charging corner. Its white colour is neutral and blends in reasonably well. While some feedback mentioned the size being “too small,” this seems counter to the product description and typical Arlo battery size, suggesting perhaps user error or confusion in those rare cases; for standard Arlo Pro/Go batteries, the bays fit correctly. The benefit of its compact design is convenience in placement and storage, especially compared to bulkier charging solutions.

Hearing From Other Users

Searching online, I found that many other users share my positive experience with the Batmax charger. The general sentiment is that it’s a great value for the price. People appreciate the fast shipping and finding that the product arrives exactly as described. Many echo the points about the fast charging speed and the convenience of the dual bays. Users frequently mention how well it works and how quickly it recharges their Arlo batteries, calling it a “nice deal” and a “great product for the price.” While there are occasional mentions of the plastic feel or rare, unusual issues, the overwhelming majority of feedback focuses on its effective performance in quickly charging two batteries simultaneously at a very competitive cost.

Final Thoughts

The problem of dead batteries for wireless Arlo security cameras is a constant battle that needs to be solved to ensure continuous, reliable home monitoring. Without a rapid and efficient charging solution, you face frustrating camera downtime and potentially vulnerable security gaps. The Batmax Rapid LCD Display USB Dual Battery Charger stands out as a great fit to solve this issue for several key reasons. Its ability to charge two batteries at once drastically cuts down on waiting time, the rapid charging capability gets your cameras back online faster, and the clear LCD displays make managing your batteries simple and straightforward. If you’re an Arlo user tired of slow charging and camera downtime, this charger is a solid investment. To learn more and check it out for yourself, click here.

Last update on 2025-07-11 / Affiliate links / Images from Amazon Product Advertising API